Mclaren Wanted $100,000+ For A New 675LT Engine...I FIXED Mine For $5 (Then Made It WAY FASTER)

Find the world's BEST DEALS on cars with AutoTempest!►bit.ly/675LT11
Send your "cheap horsepower" finds to► FoundOnAutoTempest@gmail.com
--------------------------------------------------------------------
Subscribe! ►bit.ly/2xZGtYN
Instagram ► therealtavarish
Tavarish Shirts and Merch! ►bit.ly/shoptavarish
--------------------------------------------------------------------
Today, I finally get my Mclaren 675LT's engine back together, and with some great help from Jared, it looks better than new, and it may be a little faster than stock. Just a little.
Special thanks to BNR Supercars!
BNR Supercars►bnrsupercars.com/
--------------------------------------------------------------------
Questions? Comments? Business inquiries? Email me at asktavarish@gmail.com
--------------------------------------------------------------------
My Equipment:
Teng Tools 715 Piece Mega Master Tool Kit - TCMM715N►amzn.to/2Lp0f4W
Simiron Epoxy Floor Coating►simiron.com
Bendpak Lifts and Equipment►bendpak.com
--------------------------------------------------------------------
Music used in this video:
NIVIRO - You [NCS Release]►eetvs.info/much/a4CubMyqjLHLsKE/video

Lae alla

Vaatamised
1,393,566

Kommentaarid

  • I'd be tempted to just tack that piece of aluminum tube on and start stacking tacks. Spending an afternoon doing so with a LOT of breaks and maybe put a little ice on the nearby gasketed areas. Since with my luck that cover would warp being off the engine. Oh, BTW, that's not MIG, that's TIG.

    Gregory TimmonsGregory Timmons3 päeva tagasi
  • No such thing as "metric Horsepower" metric power is measured in kilowatts

    Camerand aCamerand a3 päeva tagasi
  • song @ 12:55 & 20:22 dvine - confessions

    Svein Arne LøkkenSvein Arne Løkken4 päeva tagasi
  • Jared is the linustechtips anthony of car guys

    GAMER JAGGAMER JAG6 päeva tagasi
  • you could try friction welding the water intake back on. Would produce a perfect weld too

    weedfreerweedfreer7 päeva tagasi
  • You welded up the the area where you used the helicoil, did that not transfer heat to the seals aswell???????

    Del ConwayDel Conway11 päeva tagasi
  • Whats the song at 7:50???

    Richie DRichie D11 päeva tagasi
  • You might get 800hp but the internals aren't designed for that much power...

    Alex DegnenAlex Degnen15 päeva tagasi
  • Where are you? Did the pressure finally get to you? Cant take it anymore? You vanished the put out some videos on garbage cars then vanished. Weird. Or did you run out of money in jail or just tired lol mia

    Ronald WilliamsRonald Williams15 päeva tagasi
  • Its all interesting stuff but cant watch as the music just ruins everything. Workshop noise is all good.

    Dave BryantDave Bryant17 päeva tagasi
  • To much money for a car but still better then wasting your money on a woman.

    dave9999 999938dave9999 99993818 päeva tagasi
  • You made a lot of work for yourself welding the water pump hose bib. You stick a rag down the tube before you cut the neck. You cut the neck and vacuum out the chips and pull the rag, fill the engine with water to 2 inches below the weld and stuf the rag back in and weld. The water pump won't get hot because it is filled with water. The yellow flame when welding is contamination.

    Alan DavisAlan Davis19 päeva tagasi
  • Interesting you used a helicoil. Working on defense systems (Phalanx CIWS and M1A1 transmission), we never allowed them...they aren't strong enough in aluminum.

    Hunter JohnsonHunter Johnson22 päeva tagasi
  • Tbh, nothing slaps Harder than a tavarish montage🤩

    daniel erichsendaniel erichsen23 päeva tagasi
  • Tavarish... the channel where Tavarish provides commentary while Jared fixes exotic cars... haha 😆

    Christopher JohnsonChristopher Johnson26 päeva tagasi
  • "Good im 2 people"

    Jonathan MartinezJonathan Martinez28 päeva tagasi
  • You should have just welded the end of the water pump outlet and hand machined it as good as you could then it never would have been seen.

    midgetracemidgetrace28 päeva tagasi
  • only on tavarish will you see a helicoil in a mclaren engine

    dawn awdishdawn awdishМісяць tagasi
  • threadlock on a helicoil????

    soopersoniksoopersonikМісяць tagasi
  • Jared: "Hi, I'm 2 people". As a 5'7" guy @ 156 pounds, I got a kick out of this!

    FoesFlyDennisFoesFlyDennisМісяць tagasi
  • whay you put the helicoil

    mtn. srl Rascumtn. srl RascuМісяць tagasi
  • You guys should shoot that oil on each others backs..warm it up first though, then you'll feel at home. I'm completely kidding..but you two rallied right into that..or shot right into it. I worked at a welding shop all through college and I couldn't count the number of broken trans ears and other mounting features I've had to weld back onto transmissions.

    Mister BeeMister BeeМісяць tagasi
  • Carbon buildup on the plugs??? Where? Those plugs were pristine..perfect...unlike your automotive knowledge. Amazing.

    Mister BeeMister BeeМісяць tagasi
  • Re. the broken front end bits that were repaired.....he said "Theoretically it will be stronger" According to which theory? That weld..."it's actually better than McLaren quality, thru don't weld that great" YEEAAAHHH RIGHT!!! That weld is shit I bet yours leaks!! Even though it's got 50X too much material on it

    Mister BeeMister BeeМісяць tagasi
  • Went together too easily, always an indicator of forgetting something, too easy or too difficult is always an indicator, must stop and have a good look something's not right, must have the perfect amount of PITA factor.

    KW57 Rx8Dr.KW57 Rx8Dr.Місяць tagasi
    • @SoulFly Well if you're that annoyed maybe you should just flock off!! They did forget something tho didn't they and it went easily and they had to go back and start over? You've no idea who you even commented to and any understanding whatsoever of my experience. I know that you're likely a millennial or Gen X so you are clueless that there are actually many people on this planet who trump both yours and his experience combined but my comment is based on likely more years of empirical experience than you have years on this planet Jr...JFYI obviously his experience is not THAT in depth either based on the entire videos and that's ok too, he's taking the chance and stepping out of his comfort zone and putting it out there for everyone to see while learning which is why I made my comment, BTW who the fuck is "rando"?

      KW57 Rx8Dr.KW57 Rx8Dr.7 päeva tagasi
    • OMG such good advice mr rando. lmao. i cant stand these foolish comments from randos tryna tell an established builder how to do his job. soooo annoying. lol

      SoulFlySoulFly8 päeva tagasi
  • Great job gents!

    Keith GrayKeith GrayМісяць tagasi
  • Come on after all this AMAZING work did not shape a nice "filet" on that epoxy patch ,all was needed is a greasy finger tip.Looks as bad as my first car fix 60 years ago.Please smooth it its a Mclaren after all. Love your channel though subscribed !

    jieff lerenardjieff lerenardМісяць tagasi
  • "In theory..." Ah! The Steinbeck approach...best plans of mice and men..

    obsolete professorobsolete professorМісяць tagasi
  • Just in case some purists are mad this car isn't perfect and/or exceeds what it would take to just buy a used 675LT, this is a SPONSORED build. Freddy and Jared are just doing what they can to restore it.

    Phil GudetPhil GudetМісяць tagasi
  • This is one annoying sounding dude... T down Tarnish. Peace.

    Tony LemontTony LemontМісяць tagasi
  • May want to wash up, they say a squirt is actually urine.

    Trance TallentineTrance TallentineМісяць tagasi
  • Hey McLaren! Care to comment on the better than McLaren aluminum welds? Watching this with much anticipation for the end result.

    Paul HiranoPaul HiranoМісяць tagasi
  • Having fun repairing, really?

    jacob daniel Kuiperjacob daniel KuiperМісяць tagasi
  • Just get on with it less talking

    Brian WhiteBrian WhiteМісяць tagasi
  • Its a mac. Laren not mc. Claren

    Samuel BoydSamuel BoydМісяць tagasi
  • I kept looking around the shop for pizza and beer. How did you get all that done without the necessary sustenance?

    John KashkaJohn KashkaМісяць tagasi
  • Metric horsepower? Blow harder...

    Hans DHans DМісяць tagasi
  • this build is almost as good as the FF lambo!!

    Fazil AhmadFazil Ahmad2 місяці tagasi
  • Nobody uses RTV anymore.................Loctite 515.

    wazza33racerwazza33racer2 місяці tagasi
  • $5.00 ?

    Ken SKen S2 місяці tagasi
  • Cheap horsepower? I bought a quadrajet intake manifold and a set of small block power pack heads from a 1966 283 corvette for $7.00 from one guy needing gas at the Shell station where I worked in 1976, (his prices, not mine), and a quadrajet carb from a 454 motorhome pulled at 5k miles for a Holly setup from another kid. I made a deal with a neighbor that if he paid for a valve job on my power packs and the gasket set, he could get my old stock 1968 307 heads reworked and I would install them on his 1968 van which had a broken exhaust valve in another 307. I swapped the #52 jets out of my 2 barrel carb for the №70s in the quadrajet, adjusted the coil spring tension on the secondary choke plates, put it all together, advanced the timing 10 degrees and started burning 95 octane premium, (at a whopping 56¢ a gallon), to adjust for the higher compression of the power packs and the .040 mill job to level the rusty surface of the heads. I rebuilt the entire top end of my engine for $12.00 in cash plus $5.95 for the quad rebuild kit. If I had more money, I would have invested in headers and a larger exhaust but at $2.30 an hour, hey, you do what you can. I estimate that what I did gave it an extra 50 horsepower but it was a learning experience to get it right the first time never doing it before then getting it right a second time on the van. That 68 Bel Aire with a powerglide trans wouldn't spin tires on an oil slick but at 30 MPH in low gear, it would top out the front shocks when I opened up the secondaries. This was back when I could get a rebuilt powerglide installed at Mr. Transmission for $149.00. I burned up 3 in 40,000 miles. In a 5 mile stretch, I actually beat a 1974 Olds 442 light to light. My tires wouldn't spin and he wouldn't keep his on the ground. I was half way to the next light every time he left the cross walk. If the idiot would have pedaled it a little, all I would have seen was tail lights. His thing was smoke and noise so he lost every time.

    Jeff McCreaJeff McCrea2 місяці tagasi
  • 12:30 reminds me of my first ex

    Jesse MoonglowJesse Moonglow2 місяці tagasi
  • Mclaren has disliked this video

    Jason MendozaJason Mendoza2 місяці tagasi
  • Hats off to these amazing manufacturers for building these beasts, and you guys for daring to fix them!

    SonnyBSonnyB2 місяці tagasi
  • Great work there, its interesting that from the outside they seem so exotic but its all pretty straight forward stuff!! Thanks for sharing your adventure!!!

    BDJ MBDJ M2 місяці tagasi
  • Hey, Freddy.. you know the trans isn't gonna last more than 20k right? Fix her and sell her.

    SHADOW517SHADOW5172 місяці tagasi
  • Kind of stupid to say You fixed it for 5$... Yeah that one part was 5$ but not the process and spent man-hours!

    Matiss RiekstinsMatiss Riekstins2 місяці tagasi
  • I like the ingenuity, but If you bought a Mclaren that only manufactured 500 of those..it seems like most of those fixes would've been a bit better.

    John GhattiJohn Ghatti2 місяці tagasi
  • Freddie "I'm adding more power" And then we also see Freddie plastic welding the intake back together........I'm a little concerned on the area's your budget is focusing here lol.

    Doug DaleDoug Dale2 місяці tagasi
  • New Electric Vehicle Just Released! - eetvs.info/much/bah6rrWqdsiTr5U/video

    Sara TorresSara Torres2 місяці tagasi
  • Hey Tavarish, Give us all an update on this project please !

    Juan MorrisonJuan Morrison2 місяці tagasi
  • My dream car. Swear I think they are the Best Buy right now. You can get one for 230/260k and it’s a limited number car. It be worth a mill in 15/20 years

    U LubesucksU Lubesucks2 місяці tagasi
  • 10:06 most scientific

    Mr. JMr. J2 місяці tagasi
  • All these moving parts that aren't there for electric. Wow all the tech just to keep gas going wow

    Cameron PottsCameron Potts2 місяці tagasi
  • "Theoretically stronger".......I saw that porosity at the beginning and was going to say something before I knew he welded it. I'd love to swap some knowledge and experience.

    PureSPLprixPureSPLprix2 місяці tagasi
  • Love this build looking for the finished product let us know when its coming please?

    Eric JohnstonEric Johnston2 місяці tagasi
  • so is the car build over?

    Fitz MichaelFitz Michael2 місяці tagasi
  • Jared is a Dude!!!

    Frank PortigianoFrank Portigiano2 місяці tagasi
  • Mclaren should hire these guys to teach them !

    Yusuf DomunYusuf Domun2 місяці tagasi
  • McLaren: We engineered each engine to its maximum perfection. Tavarish: hold my beer.........can......... next to the engine manifold am welding the beer can as a new manifold jajajaja

    useruser2 місяці tagasi
  • Me: I detailed my front bumper this quarantine Tavarish: Same here bro

    useruser2 місяці tagasi
  • Whats going on with this build?

    iamtechbananasiamtechbananas2 місяці tagasi
    • v tune

      Craig MolreyCraig Molrey2 місяці tagasi
  • How was it a $5 pickle 😊? But great job tho

    thinkin thinkinthinkin thinkin2 місяці tagasi
  • Update?

    Austin KentAustin Kent2 місяці tagasi
  • 15:35 i see some Lad Nova wheels in the background, does Tavarish have a Lada??

    PotatoPotato2 місяці tagasi
  • Not a heli coil those are junk use a solid insert.

    Lars MansonLars Manson2 місяці tagasi
  • Awesome video. Loved the ingenuity with repairing the parts! 👍

    Barrow Motorcycle SalesBarrow Motorcycle Sales2 місяці tagasi
  • If you’re going to show us plumber’s crack, you might as well see if you can get Tommy Hilfiger to sponsor you as well. Otherwise, love the videos!

    Greg SteinigerGreg Steiniger2 місяці tagasi
  • Everyone should have a buddy like Jared

    erikigerikig2 місяці tagasi
  • Man you are back! Brilliant

    Tito KabirTito Kabir2 місяці tagasi
  • Listen to 0:19-0:30 with your eyes closed.

    Send ItSend It2 місяці tagasi
  • imagine thinking you know what your doing. but in reality thats why jareds there doing all the real work LMAOOOOO!!!!! this kid doesn't deserve a like or sub. or even a Engine of this caliber smfh

    Caleb OchsCaleb Ochs2 місяці tagasi
  • Thumbs up for the big squirt

    Ryan PoeRyan Poe2 місяці tagasi
  • A new timing cover/water pump isnt an option...?

    Sean HSean H2 місяці tagasi
  • what's about the old yellow fake lambo???

    michiamorubenablemichiamorubenable2 місяці tagasi
  • Aye T whats the name this song playing while Assembling the power train?

    Freakin MexaricanFreakin Mexarican2 місяці tagasi
  • Damper, not dampener

    McrydMcryd2 місяці tagasi
  • What’s happening with this car?

    Life of JarvisLife of Jarvis3 місяці tagasi
  • Is this build still going on? What did I miss?

    M KneisM Kneis3 місяці tagasi
  • You guys should team up with "VTECH" both of you are putting one of these cars together. You guys are amazing, if you can piece together all of these wires and pieces thousands I could never do it!

    Kurt HuckKurt Huck3 місяці tagasi
  • What is up with all you guys using Heli-Coils? Have you never heard of Timesert? About three trillion times better!!!!!!! But hey, beyond that, always impressed with your abilities to do what you are doing.

    Aaron HoweAaron Howe3 місяці tagasi
  • Thanks! helped me fix my mclaren also

    gusgus3 місяці tagasi
  • Ah yes. I see misleading title and milking the hell out of every tiny action to consume a whole episode thereby stretching the project to ungodly timeframe for views is still your norm.

    cbmbdbcbmbdb3 місяці tagasi
  • So it got crashed because it had too much horsepower- and you added more? Just saying🤪

    Rosco The FirstRosco The First3 місяці tagasi
  • It's not pretty but it exists- excellent 👍

    Rosco The FirstRosco The First3 місяці tagasi
  • Don’t use a coil ! Use a time sert !

    Rick MondragonRick Mondragon3 місяці tagasi
  • Can't wait to see the next video: McLaren files a lawsuit against me..

    Jimmy NeutronJimmy Neutron3 місяці tagasi
  • Hey guy just found your channel. Great channel. Also I would like to give you a tip when tapping aluminum, use kerosene as a lubricant. Im a tool and die maker for 40 years.

    thecoachrobbthecoachrobb3 місяці tagasi
  • All the engine fixes look good

    REPZ06REPZ063 місяці tagasi
  • Come on i want to see this car come together post more videos

    John ButlerJohn Butler3 місяці tagasi
  • Can you please number you’re episodes I’ve just joined you and I’m having trouble finding the order of the videos Cheers

    marky markmarky mark3 місяці tagasi
  • why the hellicoil ....

    Jo KenJo Ken3 місяці tagasi
  • Waiting

    Phat LazPhat Laz3 місяці tagasi
  • Those plugs fit Yamaha outboard engines.

    potato lew44potato lew443 місяці tagasi
  • If the sky is the limit, then you can just buy a massive chunk of aluminum that you can fabricate the block and heads from. When you have that done and you have the $2000 worth of other parts you need from Summit racing to build the engine. You can easily build a 1500 hp monster motor for next to nothing.

    BaronstoneBaronstone3 місяці tagasi
  • i think they are called a "Power Unit" more recently in Formula one because they are 1.6Litre V6 hybrids so they no longer call them an engine.. That's still classified as an engine and a gorgeous one at that !!

    Toddy RocksToddy Rocks3 місяці tagasi
  • So your mechanic works for free?

    Steve CadmanSteve Cadman3 місяці tagasi
  • Have you seen the Indian guy that does aluminum casting? No telling what you could do with some dirt a fire and something to cast.

    5150 Eddie5150 Eddie3 місяці tagasi
  • Wow! How have I not found your channel till now? The slow motion is absolutely on point. How often does anyone get to see an entire Mcclellan engine? Super cool.

    5150 Eddie5150 Eddie3 місяці tagasi
  • That pressure test jus killed me though! 🤣😝😂😄

    Fernando GaeteFernando Gaete3 місяці tagasi